Asphalt Paving
Smooth, durable asphalt surfaces built to last through Pennsylvania winters — for driveways, parking lots, and everything in between.
Asphalt Paving Services in the Lehigh Valley
Our team provides asphalt paving services for residential driveways, commercial parking lots, and private roadways across the Lehigh Valley, PA. Our work is built around proper site preparation, correct material selection, and installation methods that hold up under freeze-thaw cycles common in Pennsylvania. Every project starts with an evaluation of the existing surface and sub-base. Weak or poorly compacted bases are the primary cause of premature asphalt failure. We address grading, drainage, and compaction before any asphalt is installed to ensure long-term performance.
New Asphalt Installation
New asphalt paving services require more than placing a top layer. We install a properly graded and compacted aggregate base, followed by asphalt applied at the correct thickness for the intended traffic load. Residential driveways and commercial lots are designed differently to account for vehicle weight and usage patterns. We also ensure water runoff is directed away from structures and pavement edges to prevent erosion and base degradation.
Resurfacing and Overlays
When existing asphalt is structurally sound but worn, resurfacing can extend its life without full replacement. Our asphalt paving services include overlays that bond a new layer to the existing surface after addressing cracks, low spots, and drainage issues. This approach is cost-effective when the base remains intact but the surface shows signs of aging such as raveling or minor cracking.
Base Repair and Surface Preparation
Failed pavement often traces back to base issues. We identify soft spots, drainage failures, and subgrade instability, then repair or rebuild those areas before paving. This may involve excavation, stone replacement, and re-compaction. Proper base preparation is essential for any asphalt paving services intended to last more than a few seasons in Pennsylvania conditions.
Line Stripping and Finishing
For commercial properties, we provide line striping to improve traffic flow and safety. Layouts are applied according to site requirements, including parking stalls, fire lanes, and directional markings. Clean striping ensures compliance and usability for both customers and employees.
Frequently Asked Questions
We recommend keeping vehicles off new asphalt for at least 48–72 hours. Full curing continues for several months as the asphalt hardens.
Residential driveways typically require 2.5 to 3 inches of compacted asphalt over a properly prepared base. Heavier use may require additional thickness.
Yes, if the existing surface and base are stable. We inspect for structural issues first, as overlays will not correct underlying failures.
Water enters small surface openings, freezes, and expands. This cycle widens cracks and weakens the pavement over time.
Sealcoating is generally recommended every 2–3 years, depending on traffic and exposure, to protect the surface from oxidation and moisture intrusion.